Flax dressing in Pennsylvania

Thanks to Christian and Johannes Zinzendorf (and Linda Eaton who arranged it and drove me!) I finally achieved a two year ambition, to turn flax stems into fibre.

Christian and Johannes have been growing and processing flax since the 1980s, and were kind enough to share their expertise with me (even though it was 3 degrees out!)

We started off with 2 year old flax stems, which were harvested when a bottom third of them stem was yellow. In their experience this provides both viable seed and good quality fibre.

Pennsylvania German flax break

Pennsylvania German hemp and flax break

The first stage is to break the flax stems using a flax break or brake.

P1110146

You move the wooden blades up and down, which crushes the flax stem into small pieces. As you can see from the first image, the break isn’t made from solid wood. The blades alternate between top and bottom which means that the flax stem is broken into small pieces rather than crushed.

The challenge of scutching on a windy day

The challenge of scutching on a windy day

Next the fibres are scutched or swingled to remove the remaining chaff/stem. This involves holding them on a wooden board and hitting them with a wooden knife or cutlass at a 45 degree angle. The fibres also begin to shine during this process. See this William Hincks print for a contemporary representation of scutching.

Scutched fibre on the left, combed fibre on the right

Scutched fibre on the left, combed fibre on the right

The final process to turn the scutched fibre into fully processed fibre is heckling or hackling. Hackling (the same as combing) pulls out any lumps, remaining stem and straightens the fibres ready for spinning. As the photo above shows, the volume of fibre dramatically decreases. The coarser shorter fibres called tow, separated in the heckling process were still used to make linen, used for heavy duty textiles such as sacks.  The fine fibres, the tear, on the right of the image were used to make the finest quality linen. The William Hincks print shows heckling too.

P1110162

You can see the tow left behind in the comb. We used two different heckles; the first had widely spaced nails, to pull out the coarsest fibre, moving onto a finer heckle to refine the fibre further.

Comparing the two stricks

Comparing the two stricks

Christian then showed me how to wind my tear fibre into a strick. The finished product! Comparison of the two stricks emphasises the importance of tacit knowledge.

While I understood the process through my reading and examining contemporary images, I had a sort of mental block about it; I understood it, but I didn’t get it (if that makes sense?)

However, by working the flax myself, breaking the stem into small pieces, scraping them off and combing the coarse fibres out, I really ‘got it’. The whole process now makes sense. For me this experience reemphasised how important it is for people studying material culture to have a go. You won’t master the early modern processes that you are trying out in a day, but you’ll understand the process and the expertise required much better.

P1110174

Christian and Johannes also have an excellent collection of flax processing tools and spinning wheels. For information on arranging a visit look at their website.

Further Reading

Leslie Clarkson, ‘The Linen Industry in Early Modern Europe’, in David Jenkins (ed) The Cambridge History of Western Textiles, Volume 1, 473-492

Adrienne D. Hood, The Weaver’s Craft: Cloth Commerce, and Industry in Early Pennsylvania (2003), chapter 3, ‘Flax and Wool: Fiber Production and Processing’

Johannes and Christian Zinzendorf, Big Book of Flax: A Compendium of Facts, Art, Lore, Projects and Song (2011)

William Hincks prints of the Irish linen industry, 1791, search the British Museum Collection online

This entry was posted in Spinning Project. Bookmark the permalink.

34 Responses to Flax dressing in Pennsylvania

Leave a Reply to Maboswayevent Cancel reply

Your email address will not be published. Required fields are marked *